We are testing our existing live build, which was prepared with Xcode 16.2, on iOS 26 beta for experience assurance and found that the [[UIDevice currentDevice] systemVersion] API is returning iOS 19 instead of the expected version iOS 26. Has anyone else observed this issue?

After installing iOS 26 Developer Beta on my iPhone 13 mini, I encountered a critical battery issue. The battery percentage was stuck at 1%, and the phone could only be used while continuously plugged in. Despite the low reading, the device remained fully functional — I could use apps, navigate, and perform tasks normally. However, the battery indicator never rose above 1%, and the Battery Health section in Settings showed 0% Maximum Capacity, which is inaccurate. I did not allow the phone to fully discharge, out of fear that it might not turn back on. Restarting the phone and changing cables or chargers had no effect. After restoring the device to iOS 18.7.2 using DFU mode, the issue disappeared entirely — the battery percentage behaved normally again and the health section showed the correct value (about 100%). Observed behavior: • Battery percentage frozen at 1% • Maximum Capacity reported as 0% • Device only functional while connected to power • Issue resolved immediately after restoring to iOS 18 Temporary solution: A DFU restore to iOS 18 (18.5 22F76) immediately resolved the issue. The battery percentage and health readings returned to normal. Additional information: • Charger used: Official Apple 20W USB-C charger • Cable used: Apple USB-C to Lightning cable • Battery health after restore: 100% (replaced)

After IOS 26 beta 2 installation in my iphone 13, I can't do a screenshot using assistivetouch nor touch on back.

(BOOL)application:(UIApplication *)application didFinishLaunchingWithOptions:(NSDictionary *)launchOptions { if (application.applicationState == UIApplicationStateBackground) { // ✅ Background launch } else { // ✅ Normal foreground launch } } Previously, when using AppDelegate to handle lifecycle methods, I could determine whether a cold start was a background launch as shown above. This allowed me to accurately measure cold start time for real-world users. The platform now requires migration to scene-based lifecycle management by iOS 16. However, after migration: In both application:didFinishLaunchingWithOptions: and scene:willConnectToSession:options: methods, application.applicationState == UIApplicationStateBackground and scene.activationState == UISceneActivationStateUnattached These values remain fixed regardless of whether it's a background launch, making them unusable for differentiation. I attempted to use information from UISceneConnectionOptions for distinction but found it ineffective. Question: Are there alternative approaches to achieve this distinction?

Hello Apple Developer Community and Apple Team, I want to raise awareness and gather support for an important feature request regarding NFC support on iPhone devices in Argentina. Millions of Argentinians use the official public transit card, SUBE, daily to pay for buses, subways, and trains. On Android devices, the SUBE app allows users to: • Check balance via NFC • Reload credit instantly • Confirm top-ups by holding the card near the phone • Use a digital version of the card (in some cases) However, iPhone users cannot use these NFC features because iOS currently does not allow third-party apps like SUBE to access the NFC chip fully. This limitation negatively impacts iPhone users, many of whom rely heavily on SUBE. I have submitted detailed feedback to Apple requesting the enablement of controlled NFC access for third-party transit apps in Argentina, starting with SUBE. I encourage fellow developers, users, and community members to support this request. Enabling this would greatly improve the user experience for millions of iPhone users, align Apple with local needs, and potentially attract new customers from Android. If anyone has insights or updates on this topic, please share. Thank you.

While editing the search text using the external keyboard (with VoiceOver on), if I try to navigate the to List using the keyboard, the focus jumps back to the search field immediately, preventing selection of list items. It's important to note that the voiceover navigation alone without a keyboard works as expected. It’s as if the List never gains focus—every attempt to move focus lands back on the search field. The code: struct ContentView: View { @State var searchText = "" let items = ["Apple", "Banana", "Cherry", "Date", "Elderberry", "Fig", "Grape"] var filteredItems: [String] { if searchText.isEmpty { return items } else { return items.filter { $0.localizedCaseInsensitiveContains(searchText) } } } var body: some View { if #available(iOS 16.0, *) { NavigationStack { List(filteredItems, id: \.self) { item in Text(item) } .navigationTitle("Fruits") .searchable(text: $searchText) } } else { NavigationView { List(filteredItems, id: \.self) { item in Text(item) } .navigationTitle("Fruits") .searchable(text: $searchText) } } } }

I’m updating my app’s alternate icons using UIApplication.shared.setAlternateIconName, and I noticed that in iOS 26, Xcode now supports the new .icon file format for App Icons. Is it possible to reference .icon files directly for alternate icons? Or does setAlternateIconName still only support traditional .png assets inside the AppIcon set? I couldn’t find any documentation confirming this either way, and I want to ensure compatibility with the new format while supporting alternate icons. Any clarification or Apple documentation link would be greatly appreciated!

Calling button flickers when making a call after updating to ios 26 beta 2 kindly solve the issue asap

I am seeing a strange issue where NSObject accessibilityRespondsToUserInteraction returns true on Simulator but false on device. Checking the same object on simulator with Accessibility inspector I see the object traits as image so why would it return true in that case? Are there any other way to check the the item might be accessibilityRespondsToUserInteraction OR Clickable beside that property and traits? (Or is it just another bug)

We are working on a Unity iOS app for the App Store. We are working with different SDKs and plugins(Firebase, Facebook, CleverTap, AVpro, DTT, etc ). We can make an Xcode export build from Unity for the iOS platform. But in Xcode, we are getting errors while building an archive for our app. `chmod: /Users/MacName/Library/Developer/Xcode/DerivedData/Unity-iPhone-gfqpbnsrmtehefgrsrsapwpcyrzk/Build/Intermediates.noindex/ArchiveIntermediates/Unity-iPhone/IntermediateBuildFilesPath/Unity-iPhone.build/Release-iphoneos/artifacts/arm64/buildstate/Il2CppOutputProject/IL2CPP/build/deploy_arm64/il2cpp: No such file or directory chmod: /Users/MacName/Library/Developer/Xcode/DerivedData/Unity-iPhone-gfqpbnsrmtehefgrsrsapwpcyrzk/Build/Intermediates.noindex/ArchiveIntermediates/Unity-iPhone/IntermediateBuildFilesPath/Unity-iPhone.build/Release-iphoneos/artifacts/arm64/buildstate/Il2CppOutputProject/IL2CPP/build/deploy_arm64/il2cpp-compile: No such file or directory chmod: /Users/MacName/Library/Developer/Xcode/DerivedData/Unity-iPhone-gfqpbnsrmtehefgrsrsapwpcyrzk/Build/Intermediates.noindex/ArchiveIntermediates/Unity-iPhone/IntermediateBuildFilesPath/Unity-iPhone.build/Release-iphoneos/artifacts/arm64/buildstate/Il2CppOutputProject/IL2CPP/build/deploy_arm64/bee_backend/mac-arm64/bee_backend: No such file or directory /Users/MacName/Library/Developer/Xcode/DerivedData/Unity-iPhone-gfqpbnsrmtehefgrsrsapwpcyrzk/Build/Intermediates.noindex/ArchiveIntermediates/Unity-iPhone/IntermediateBuildFilesPath/Unity-iPhone.build/Release-iphoneos/GameAssembly.build/Script-C62A2A42F32E085EF849CF0B.sh: line 27: /Users/MacName/Library/Developer/Xcode/DerivedData/Unity-iPhone-gfqpbnsrmtehefgrsrsapwpcyrzk/Build/Intermediates.noindex/ArchiveIntermediates/Unity-iPhone/IntermediateBuildFilesPath/Unity-iPhone.build/Release-iphoneos/artifacts/arm64/buildstate/Il2CppOutputProject/IL2CPP/build/deploy_arm64/il2cpp: No such file or directory Command PhaseScriptExecution failed with a nonzero exit code Please help anyone to resolve this issue. Unity version - 2023.2.20f1 Xcode version - 16.4

When using UITabBarController and set a custom tabbar: TabBarViewController.swift import UIKit class BaseViewController: UIViewController { override func viewDidLoad() { super.viewDidLoad() } } class HomeViewController: BaseViewController { override func viewDidLoad() { super.viewDidLoad() view.backgroundColor = .red navigationItem.title = "Home" tabBarItem = UITabBarItem(title: "Home", image: UIImage(systemName: "house"), tag: 0) } } class PhoneViewController: BaseViewController { override func viewDidLoad() { super.viewDidLoad() view.backgroundColor = .purple navigationItem.title = "Phone" tabBarItem = UITabBarItem(title: "Phone", image: UIImage(systemName: "phone"), tag: 1) } } class PhotoViewController: BaseViewController { override func viewDidLoad() { super.viewDidLoad() view.backgroundColor = .yellow navigationItem.title = "Photo" tabBarItem = UITabBarItem(title: "Photo", image: UIImage(systemName: "photo"), tag: 1) } } class SettingViewController: BaseViewController { override func viewDidLoad() { super.viewDidLoad() view.backgroundColor = .green navigationItem.title = "Setting" tabBarItem = UITabBarItem(title: "Setting", image: UIImage(systemName: "gear"), tag: 1) } } class TabBarViewController: UITabBarController { override func viewDidLoad() { super.viewDidLoad() let homeVC = HomeViewController() let homeNav = NavigationController(rootViewController: homeVC) let phoneVC = PhoneViewController() let phoneNav = NavigationController(rootViewController: phoneVC) let photoVC = PhotoViewController() let photoNav = NavigationController(rootViewController: photoVC) let settingVC = SettingViewController() let settingNav = NavigationController(rootViewController: settingVC) viewControllers = [homeNav] let dataSource = [ CustomTabBar.TabBarModel(title: "Home", icon: UIImage(systemName: "house")), CustomTabBar.TabBarModel(title: "Phone", icon: UIImage(systemName: "phone")), CustomTabBar.TabBarModel(title: "Photo", icon: UIImage(systemName: "photo")), CustomTabBar.TabBarModel(title: "Setting", icon: UIImage(systemName: "gear")) ] let customTabBar = CustomTabBar(with: dataSource) setValue(customTabBar, forKey: "tabBar") } } CustomTabBar.swift: import UIKit class CustomTabBar: UITabBar { class TabBarModel { let title: String let icon: UIImage? init(title: String, icon: UIImage?) { self.title = title self.icon = icon } } class TabBarItemView: UIView { lazy var titleLabel: UILabel = { let titleLabel = UILabel() titleLabel.translatesAutoresizingMaskIntoConstraints = false titleLabel.font = .systemFont(ofSize: 14) titleLabel.textColor = .black titleLabel.textAlignment = .center return titleLabel }() lazy var iconView: UIImageView = { let iconView = UIImageView() iconView.translatesAutoresizingMaskIntoConstraints = false iconView.contentMode = .center return iconView }() private var model: TabBarModel init(model: TabBarModel) { self.model = model super.init(frame: .zero) setupSubViews() } required init?(coder: NSCoder) { fatalError("init(coder:) has not been implemented") } private func setupSubViews() { addSubview(iconView) iconView.topAnchor.constraint(equalTo: topAnchor).isActive = true iconView.centerXAnchor.constraint(equalTo: centerXAnchor).isActive = true iconView.widthAnchor.constraint(equalToConstant: 34).isActive = true iconView.heightAnchor.constraint(equalToConstant: 34).isActive = true iconView.image = model.icon addSubview(titleLabel) titleLabel.topAnchor.constraint(equalTo: iconView.bottomAnchor).isActive = true titleLabel.leadingAnchor.constraint(equalTo: leadingAnchor).isActive = true titleLabel.trailingAnchor.constraint(equalTo: trailingAnchor).isActive = true titleLabel.heightAnchor.constraint(equalToConstant: 16).isActive = true titleLabel.text = model.title } } private var dataSource: [TabBarModel] init(with dataSource: [TabBarModel]) { self.dataSource = dataSource super.init(frame: .zero) setupTabBars() } required init?(coder: NSCoder) { fatalError("init(coder:) has not been implemented") } override func sizeThatFits(_ size: CGSize) -> CGSize { var sizeThatFits = super.sizeThatFits(size) let safeAreaBottomHeight: CGFloat = safeAreaInsets.bottom sizeThatFits.height = 52 + safeAreaBottomHeight return sizeThatFits } private func setupTabBars() { backgroundColor = .orange let multiplier = 1.0 / Double(dataSource.count) var lastItemView: TabBarItemView? for model in dataSource { let tabBarItemView = TabBarItemView(model: model) addSubview(tabBarItemView) tabBarItemView.translatesAutoresizingMaskIntoConstraints = false tabBarItemView.topAnchor.constraint(equalTo: topAnchor).isActive = true tabBarItemView.bottomAnchor.constraint(equalTo: bottomAnchor).isActive = true if let lastItemView = lastItemView { tabBarItemView.leadingAnchor.constraint(equalTo: lastItemView.trailingAnchor).isActive = true } else { tabBarItemView.leadingAnchor.constraint(equalTo: leadingAnchor).isActive = true } tabBarItemView.widthAnchor.constraint(equalTo: widthAnchor, multiplier: multiplier).isActive = true lastItemView = tabBarItemView } } } UIKit show both custom tabbar and system tabbar: the Xcode version is: Version 26.0 beta 2 (17A5241o) and the iOS version is: iOS 26 (23A5276f)

Hi, I have a document-based SwiftUI multiplatform app, where the document is saved as JSON. Obviously I don't want Quick Look to show the JSON of my file, so I made a Quick Look Preview extension for each platform. The macOS one works… okay, sometimes it's tricky to test and I need to use qlmanage to empty the cache or to show the preview, but it does work. I can even debug it. But the iOS one just never seems to be run. If I show Quick Look in the Files app on iOS, or if I AirDrop a file from my app to my iPhone, it shows as JSON, with an option to open it in my app. If I run the iOS Preview Extension in the debugger and launch the Files app, and then try to use Quick Look in a file there, it shows the JSON and the debugger just stays in the state 'Waiting to Attach'. The preview extensions are not data based; in both of them I have implemented func preparePreviewOfFile(at url: URL) async throws in PreviewViewController.swift. Pretty much the same code except one is using a UIHostingController and the other is using an NSHostingController. The only difference in the Info.plists for the two extensions is that the iOS one uses NSExtensionMainStoryboard while the macOS one uses NSExtensionPrincipalClass. This is how they were set up when I created them from the relevant Quick Look Preview Extension templates. I made a sample project with a much simpler document, UI, etc. and I have the same issue there. The macOS preview works, the iOS one never runs. I have checked that the correct preview extension is embedded in the target for each OS (under Embed Foundation Extensions in the Build Phases) Is there anything I need to do differently in iOS, or anything I might have inadvertently got wrong? Is there a way to run something similar to qlmanage on iOS, since that sometimes seems to help on macOS? Incidentally, I have also added Quick Look Thumbnail extensions, and they work on both platforms.

While testing my application on iOS beta 26, I am experiencing issues with the native UISegmentedControl component from UIKit. After implementing the control, I noticed that I am unable to switch to the second segment option—the selection remains fixed on the first segment regardless of user interaction. I have already reviewed the initial configuration of the control, the addition of the segments, and the implementation of the target-action, but the issue persists. I would like to understand what could be causing this behavior and if there are any specific adjustments or workarounds for iOS 26. I created a minimal application containing only a UISegmentedControl to clearly demonstrate the issue.

An update to my app has been rejected under Guideline 2.1 - Performance - App Completeness, citing that only a blank screen appeared on launch. I cannot recreate this bug. I have, on this exact device and iOS version that the reviewer used (iPhone 13 mini, iOS 18.5): Downloaded the app from TestFlight and successfully launched Launched in release mode Launched as a new install AND as an upgrade Launched with no internet, good internet and slow internet I have asked the reviewer for any crash logs and more detail about the testing setup that led to this blank screen on launch, and no extra information was provided at all, just another screenshot of the launch screen. Where do I go from here? Any advice would be hugely appreciated.

I can see that iOS beta 2 was released yesterday. I'm not running the beta yet on my actual iPhone, but I wanted to see if an issue I reported in beta 1 was fixed. Is there a way to update my iOS 26 simulator for beta 2? Usually, there's a new Xcode download that includes the new simulator, but it looks like the most recent Xcode beta release was June 9.

We are developing an iOS application with a key feature designed to enhance user safety: real-time assessment of Wi-Fi network security. The "Safe Wi-Fi" feature aims to inform users about the security level of the Wi-Fi network they are currently connected to. Our goal is to provide this information seamlessly and continuously, even when the user isn't actively using the app. Currently, we've implemented this feature using a NWPathMonitor. The limitation of NWPathMonitor is that it doesn't function when the app is in a kill state. We are looking for guidance on how to achieve persistent Wi-Fi security monitoring in the background or when the app is killed. Is there any API (Public, Special API, etc) or a recommended approach that allows for real-time Wi-Fi connection monitoring (including connection changes and network details) even when the app is not actively running or is in a kill state. Thank you in advance for your help.

iOS18的app中加载了自己开发的H5页面，H5页面有个input输入框，每次输入框聚焦的时候，都会弹出键盘滑行键入的提示：“滑动手指将字母拼成词以快速键入”，应该怎么修改，达到不每次都弹出这个提示呢

I need to automate updating to latest iOS betas as part of my ci script, but I can't get it to install iOS 26.0 beta for the life of me, using xcodes or xcodebuild. I can see the version listed using xcodes runtimes --include-betas, and I tried sudo xcodes runtimes install "iOS 26.0-beta1", but I would get the error Downloading Runtime iOS 26.0-beta1: 0% Error: ProcessExecutionError()\ I also tried xcodebuild -downloadPlatform iOS -buildVersion 23A5260l, where I found the specific build id on apples dev images website. But I would get the error iOS 23A5260l is not available for download. Specific version download failed, trying downloadPlatform ios latest... And similar error for trying xcodebuild -downloadPlatform iOS -buildVersion 26.0 or other version ids I found online. But this command would work for any other versions and betas listed on the website. I was able to install iOS 26.0 through xcodebuild -downloadPlatform iOS, which automatically installed it for me, but this is unideal for my situation, as I want to control which betas to install instead of just the latest one (like iOS 18.6 beta that just came out). Is anyone else also struggling with these errors? xcodes version 1.6.2 Xcode version 26.0 Beta (installed and selected through xcode)

I have an AppIntent that edits an object in my app. The intent accepts an app entity as a parameter, so if you run the intent it will ask which one do you want to edit, then you select one from the list and it shows a dialog that it was edited successfully. I use this same intent in my Home Screen widget initializing it with an objectEntity. The code needs to run in the app's process, not the widget extension process, so the file is added to both targets and it conforms to ForegroundContinuableIntent, and that is supposed to ensure it always runs in the app process. This works great when run from the Shortcuts app and when involved via a button in the Home Screen widget, exactly as expected. Here is that app intent: @available(iOS 17.0, *) struct EditObjectIntent: AppIntent { static let title: LocalizedStringResource = "Edit Object" @Parameter(title: "Object", requestValueDialog: "Which object do you want to edit?", inputConnectionBehavior: .connectToPreviousIntentResult) var objectEntity: ObjectEntity init() { print("INIT") } init(objectEntity: ObjectEntity) { self.objectEntity = objectEntity } @MainActor func perform() async throws -> some IntentResult & ReturnsValue<ObjectEntity> & ProvidesDialog { // Edit the object from objectEntity.id... return .result(value: objectEntity, dialog: "Done") } } @available(iOS 17.0, *) @available(iOSApplicationExtension, unavailable) extension EditObjectIntent: ForegroundContinuableIntent { } I now want to create a ControlButton that uses this intent: struct EditObjectControlWidget: ControlWidget { var body: some ControlWidgetConfiguration { StaticControlConfiguration(kind: "EditObjectControlWidget") { ControlWidgetButton(action: EditObjectIntent()) { Label("Edit Object", systemImage: "pencil") } } } } When I add the button to Control Center and tap it (on iOS 18), init is called 3x in the app process and 2x in the widget process, yet the perform function is not invoked in either process. No error appears in console logs for the app's process, but this appears for the widget process: LaunchServices: store <private> or url <private> was nil: Error Domain=NSOSStatusErrorDomain Code=-54 "process may not map database" UserInfo={NSDebugDescription=process may not map database, _LSLine=72, _LSFunction=_LSServer_GetServerStoreForConnectionWithCompletionHandler} Attempt to map database failed: permission was denied. This attempt will not be retried. Failed to initialize client context with error Error Domain=NSOSStatusErrorDomain Code=-54 "process may not map database" UserInfo={NSDebugDescription=process may not map database, _LSLine=72, _LSFunction=_LSServer_GetServerStoreForConnectionWithCompletionHandler} What am I doing wrong here? Thanks!

In the Get to Know App Intents WWDC session, it was said New this year, you can now add Spotlight indexing keys directly on properties. Annotating properties allows Spotlight to show more relevant information to customers. When donating indexed entities, the framework will handle creating the searchable item and attribute set for you. After donating entities, they can be found in Spotlight. How do you donate indexed app entities? Making app entities available in Spotlight seems to state it's not necessary to donate entities: The system can automatically extract the keys for Spotlight indexing at compile time and store them in the App Intents metadata that Xcode generates as part of your app’s bundle. As a result, Spotlight indexing is faster and can find your app entities without launching your app, and without you having to explicitly donate the entities to Spotlight. You also don’t need to manually update or remove entities from the Spotlight index when your app’s data changes. Say I have a CarEntity. The user can create/update/delete cars at any time. What is the modern way to get cars to appear in Spotlight in iOS 26?